Description
SMP Surface Mount Power Cross Protection Fuses are primarily intended for use in telecommunication circuit applications requiring low current protection with high surge tolerance.
They are typically used to replace heat coil type devices.
They are designed to be placed between the line input and the surge arresting components (mov. gas tube, zenor diode, air gaps, etc.)
These fuses will withstand transient surge currents generated by lightning in accordance with the attached table.
SMP Fuses guard protected circuitry against sustained overload or short circuit conditions. Such sustained overloads may be generated by accidental contact between utility cables and phone lines (power line cross).
SMP Fuse are used in circuits to obtain compliance with the test requirements specified in UL 1950/60950 and Bellcore GR 1089.

SMP 500
SMP 1.25  

SMPD0104-Surface Mount Power Cross Protection Fuse

Description
The AT93C46/56/57/66 provides 1024/2048/4096 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64/128/256 words of 16
bits each, when the ORG Pin is connected to VCC and 128/256/512 words of 8 bits
each when it is tied to ground.
The device is optimized for use in many industrial and commercial applications where low power and low voltage operations are essential.
The AT93C46/56/57/66 is available in space saving 8-pin PDIP and 8-pin JEDEC and
EIAJ SOIC packages.

Features
*Low Voltage and Standard Voltage Operation
-5.0 (VCC = 4.5V to 5.5V)
-2.7 (VCC = 2.7V to 5.5V)
-2.5 (VCC = 2.5V to 5.5V)
-1.8 (VCC = 1.8V to 5.5V)
*User Selectable Internal Organization
-1K: 128 x 8 or 64 x 16
-2K: 256 x 8 or 128 x 16
-4K: 512 x 8 or 256 x 16
*3-Wire Serial Interface
*2 MHz Clock Rate (5V) Compatibility
*Self-Timed Write Cycle (10 ms max)
*High Reliability
-Endurance: 1 Million Write Cycles
-Data Retention: 100 Years
-ESD Protection: >4000V
*Automotive Grade and Extended Temperature Devices Available
*8-Pin PDIP, 8-Pin JEDEC and EIAJ SOIC, and 8-Pin TSSOP Packages

AT93C46-10PC
AT93C46-10SC
AT93C46R-10SC  

AT93C46-3-Wire Serial EEPROMs

General Description
The AME8841 linear regulator features low quiescent current (30mA typ.) with low dropout voltage, making it ideal for battery applications.
The space-saving SO-8 package is attractive for "Pocket” and "Hand Held" applications.
These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" of operating conditions.
The AME8841 is stable with an output capacitance of 2.2mF or greater.

Features
*Very Low Dropout Voltage
*Guaranteed 600mA Output
*Accurate to within 1.5%
*30mA Quiescent Current
*Over-Temperature Shutdown
*Current Limiting
*Short Circuit Current Fold-back
*Power-Saving Shutdown Mode
*Space-Saving SO-8 Package
*Many fixed output voltages available
*Low Temperature Coefficient

Applications
*Instrumentation
*Portable Electronics
*Wireless Devices
*Cordless Phones
*PC Peripherals
*Battery Powered Widgets
*Electronic Scales

AME8841AEHA
AME8841BEHA
AME8841CEHA

 

AME8841-600mA CMOS LDO