GENERAL DESCRIPTION
The ADSD-1410S is a functionally complete, dual 14-bit, 10MSPS, sampling A/D converter. Its standard, 40-pin, triple-wide SMT DIP contains two fast-settling sample/hold amplifiers, two 14-bit A/D converters, multiplexed output buffers, a precision reference, and all the timing and control logic necessary to operate from either two or a single start convert pulse.
The ADSD-1410S is optimized for wideband frequencydomain applications and is fully FFT tested. The ADSD- 1410S requires only ±5V supplies and typically consumes 1.6 Watts. The digital output power supply is capable of directly driving 5V or 3V logic systems. Models are available in either commercial 0 to +70°C or military -55 to +125°C operating temperature ranges.

FEATURES
*14-bit resolution; 10MSPS sampling rate
*Functionally complete; ±2.5V input range
*No missing codes over full temperature range
*Edge-triggered
*±5V supplies, 1.6 Watts
*76dB SNR, –83dB THD
*Ideal for both time and frequency domain applications

ADSD-1410S, ADSD-1410S-EX

 

ADCDS-1403 - Dual 14-Bit, 10MSPS Sampling A/D Converter

GENERAL DESCRIPTION
DATEL's ADS-325A is a low power, 10-bit, 20MHz, CMOS sampling A/D converter. Its small 48 pin plastic LQFP package contains a S/H amplifier, a 3-state output register, linearity calibration circuitry, and all necessary control logic. Only two external reference voltages, an A/D clock and a few digital inputs are required. The A/D clock may be applied with 50% duty cycle.
The excellent dynamic performance includes a spurious free dynamic range of 65dB and a signal-to-noise ratio with distortion of 54dB with a 3MHz input. ADS-325A is capable of operating from a single +5V power supply and typically consumes only 150mW. It can also operate from a +5V analog VS with +3.3V digital VS enabling an interface with 3.3V logic circuitry. The ADS-325A is ideally suited for high quality video/CCD imaging applications.

FEATURES
*10-bit, 20MHz sampling
*±1LSB max. differential nonlinearity
*Internal calibration circuit
*Internal S/H amplifier
*70MHz input bandwidth
*TTL/CMOS compatible in-out logic
*Latched three-state output data
*Single +5V supply
*Low 150mW power dissipation
*Small 48 pin LQFP package
*Low cost

 

ADS-325A - 10-Bit, 20MHz Sampling A/D Converter

Features
*High equability,long life
*Pull-in on delay ( both poles )
*Adopt LSI,high precision switch
*LED show power on and time reach
*4 Time range
*Plug in installation
*Octal Socket Available

JSB-53FAA12VDC, JSB-53FAB12VDC, JSB-53FAC12VDC, JSB-53FAD12VDC, JSB-53FAE12VDC, JSB-53FAF12VDC, JSB-53FAG12VDC, JSB-53FAA24VDC, JSB-53FAB24VDC, JSB-53FAC24VDC, JSB-53FAD24VDC, JSB-53FAE24VDC, JSB-53FAF24VDC, JSB-53FAG24VDC, JSB-53FAA48VCD, JSB-53FAB48VCD, JSB-53FAC48VCD, JSB-53FAD48VCD, JSB-53FAE48VCD, JSB-53FAF48VCD, JSB-53FAG48VCD, JSB-53FAA110VDC, JSB-53FAB110VDC, JSB-53FAC110VDC, JSB-53FAD110VDC, JSB-53FAE110VDC, JSB-53FAF110VDC, JSB-53FAG110VDC, JSB-53FAA110VAC, JSB-53FAB110VAC, JSB-53FAC110VAC, JSB-53FAD110VAC, JSB-53FAE110VAC, JSB-53FAF110VAC, JSB-53FAG110VAC, JSB-53FAA120VAC, JSB-53FAB120VAC, JSB-53FAC120VAC, JSB-53FAD120VAC, JSB-53FAE120VAC, JSB-53FAF120VAC, JSB-53FAG120VAC, JSB-53FAA220VAC, JSB-53FAB220VAC, JSB-53FAC220VAC, JSB-53FAD220VAC, JSB-53FAE220VAC, JSB-53FAF220VAC, JSB-53FAG220VAC, JSB-53FAA240VAC, JSB-53FAB240VAC, JSB-53FAC240VAC, JSB-53FAD240VAC, JSB-53FAE240VAC, JSB-53FAF240VAC, JSB-53FAG240VAC
 

JSB-53FA - Time Relays

DESCRIPTION
The 1000 series are intended for wideband and pulse operations.
They are also suitable for signal isolation and small isolated power supplies.
The compact footprint makes them ideal for applications where space is at a premium.

FEATURES
*UL 94V-0 Package Material
*Isolatio*to 2kVrms
*Inductance to 35mH
*Compact Footprint
*PCB Mounting

1001
1002
1003  

1000-Pulse Transformers

DESCRIPTION
The NM232DDC is an electrically isolated dual transmitter and receiver designed to interface
data terminal equipment (DTE) with data communications equipment (DCE).
The device provides two data receive channels and two data transmit channels.
Each channel is EIA-232-D, EIA-232‑E and CCITT V.28 compatible at the interface boundary and TTL/CMOS compatible at the logic connections.
No external components are needed and a single 5V input supply powers all functions either side of the isolation boundary.
A low-power shutdown mode and high impedance state for receiver outputs is effected via two pins, SHUTDOWN and ENABLE.
The device is supplied in a low profile 24 pin DIL package.

FEATURES
* RoHS compliant
* Single 5V supply
* 50μW low power shutdown
* TTL/CMOS Logic compatible
* EIA-232-D/E and CCITT V.28 compatible
* Dual transmitters and receivers
* 1.5kVrms Isolation  

NM232DDC - Isolated Dual EIA-232-D Transmitter and Receiver